Hayward Flow Control
filter bags

The expanded Filter Bag line from Hayward Flow Control includes sizes 1 (16 inches) and 2 (32 inches) with polypropylene, polyester and nylon material options. The expanded filter line includes needle felt and monofilament mesh in sewn or welded construction. Available with 1-800 micron rating with PP rings or flanges, all bag materials are silicon free. Size 1 bags have a 90 gpm flow rate and size 2 bags have a 180 gpm flow rate. 888/429-4635; www.haywardflowcontrol.com

Val-Matic Dual Disc check valve

The Dual Disc check valve from Val-Matic features non-slam, spring-assisted closing, pressure-sensitive vulcanized seat for tight closure at both low
and high pressures and lift and pivot action to reduce seat wear. The valve is available in sizes from 2 to 60 inches for pressure up to 500 psi in Wafer (ANSI 125, ISO PN10, ISO PN16), Lug and Grooved End connections. 630/941-7600; www.valmatic.com

RIDGID folding pipe stand

The VF-99 folding pipe stand from RIDGID is designed for joining pipes up to 12 inches in diameter and up to 2,500 pounds. The 24-pound stand features folding rectangular profile legs (27 inches in diameter open, 7 inches closed) and comes with an ergonomic V-handle that adjusts from 28 to 58 inches high and a locking ring to hold the stand in place. 800/769-7743; www.ridgid.com

KSB Sewatec volute casing pump

The Sewatec dry-installed volute casing pump from KSB is designed for wastewater transport and treatment, sludge handling and stormwater applications. Features include a flexible hydraulic design, two mechanical seals to protect against failure, even during extended use and fluctuating conditions.
The pump line has a diameter of 2 to 28 inches, maximum flow rate of 15,000 gpm, heads to 320 feet and liquid temperature limit of 158 degrees F. Cleanout openings in pump volute are standard beginning with 4-inch models. 804/222-1818; www.ksbusa.com

Jenny direct-drive cold pressure washer

Steam Jenny direct-drive cold pressure washers from Jenny Products are powered by 9 or 13 hp Honda GX Series engines and feature a triplex ceramic plunger pump. Pressures range from 3,000 to 4,000 psi with flow from 3 to 4 gpm. The washers have thermal pump protection, unloader valve and high-pressure relief valve to protect the pump. The engine automatically shuts down if low oil levels are detected. The powder-coated chassis is made from 7-gauge steel. 814/445-3400; www.steamjenny.com