Stanley hydrant saver

The hydrant saver from Stanley Hydraulic Tools is designed to remove seized valve seats without excavation or extra personnel. Powered by the Stanley IW24 impact wrench, sockets fit most hydrants, including Mueller, Clow, Kennedy and Waterous. The Northern Kit (31043) has an 8-foot power tube and the Southern Kit (31044) has a 6 1/2-foot tube. Both kits include a 1 1/2-foot extension, alignment wrench, retaining pins and Mueller 5 1/4-inch socket. 503/659-5660; www.stanleyhydraulic.com.

BOMAG light tandem roller

The BW100AD-4 tandem vibratory roller from BOMAG Americas is powered by a Tier 4i, 32.6 hp, water-cooled Kubota diesel engine. It delivers up to 8.35 pounds of centrifugal force per drum and a maximum frequency of 4,200 vibrations per minute. Safety features include ROPS with safety belts, backup alarm and emergency stop button. The roller’s engine cover and dashboard are lockable to protect against vandalism. 800/782-6624; www.bomag.com/us.

KOHLER 2,500 kW generator

The 2,500 kW (model 2500REOZDC) generator with V-16 engine from KOHLER Power Systems has a 60 Hz standby rating, 50 C cooling system, heavy-duty air cleaner and dual-bearing alternators. The generator is International Building Code (IBC) 2012 seismic certified. It also meets NFPA 110 requirements, providing power in less than 10 seconds. 800/544-2444; www.kohlerpower.com.

Endress+Hauser two-wire magmeter

The Proline Promag 200 two-wire electromagnetic flowmeter from Endress+Hauser offers the same measuring performance as four-wire magmeters. The Promag H200 is available in line sizes of 1/12 to 1 inch, while the Promag 200 is available in line sizes from 1/2 to 8 inches for measuring the flow rates of conductive fluids. No seals or external enclosures are required for installation in hazardous areas. 888/363-7377; www.us.endress.com.

Agru America geosynthetic clay liner

GeoClay reinforced needle-punched geosynthetic clay liner from Agru America features a uniform layer of granular bentonite, encapsulated between two nonwoven geotextiles. GCL is designed for moderate to steep slopes and moderate to high load applications where increased internal shear strength is required. 800/373-2478; www.agruamerica.com.

Magnatrol bronze solenoid valves

Type A and AR bronze solenoid valves from Magnatrol Valve Corp. are designed for water, wastewater and fuel oil applications. Available for pipe sizes from 1/2 to 3 inches in diameter, the valves feature cast bronze, globe pattern bodies with NPT ends and packless construction with continuous duty coils for all voltages. The valves require no differential pressure to open and can be serviced while in the pipeline. 973/427-4341; www.magnatrol.com.

Butterworth industrial tank cleaner

Designed to remove machining oils from steel surfaces, the unidirectional BC tank cleaning machine from Butterworth creates a two-nozzle, cone-shaped circular cleaning pattern with impact impingement. 281/821-7300; www.butterworth.com.

JWCE grease receiving, screening system

The Heavy Object Trap (HOT), model GRS, grease receiving and screening system from JWC Environmental has a variable bar screen with 1/2- and 1-inch spacings to capture and direct heavy objects, including rocks, silverware and trash into the debris basket. The largest basket can hold up to 2.2 cubic feet of material. The bar screen design and hot water washdown system prevents screen blinding for high flow rates of grease. The HOT system is available in six sizes with a maximum flow rate of 600 gpm and operating pressure of 15 psi and 4- or 6-inch pipelines. 800/331-2277; www.jwce.com.

Lowell ratchet hydrant wrenches

Ratcheting hydrant wrenches from Lowell Corp. handle pentagonal or square nuts. Model 52F has a 15-inch iron handle, Model 53F has a 20-inch iron handle and Model 252F has a 32 1/2-inch stamped double handle. Pentagonal sockets are adjustable from 1/2 to 2 inches. The double-handle 252F allows for two-person operation. 800/456-9355; www.lowellcorp.com.

Universal Flow Monitors vortex-shedding flowmeters

P420 vortex-shedding flowmeters from Universal Flow Monitors are designed for process water, membrane permeate, brine and corrosive fluids in water treatment, desalination and chemical treatment applications. The meters include models with wetted parts made entirely of PVC or CPVC for greater heat resistance. The CPVC body meter has a maximum operating temperature of 180 degrees F and the PVC meter has a maximum operating temperature of 140 degrees F. Both meters are available in five pipe diameters (1/2, 3/4, 1, 1 1/2 and 2 inches), providing a flow range from 12 to 200 gpm. 866/542-9641; www.flowmeters.com.

Makita 14-inch power cutter

The EK7651H 14-inch, 4-stroke power cutter from Makita U.S.A. eliminates the need for oil/fuel mixture. Operating at 97.2 decibels, the cutter uses 0.45 gallons of fuel per hour. The automatic engine decompression valve provides easier pull starts, while the pressure-compensated carburetor with vented choke plate adjusts automatically to prevent flooding. For improved handling, the integrated aluminum wheel kit retracts when not in use. 800/462-5482; www.makitatools.com/mm4.

Reelcraft static discharge reel

The GHC3100 N industrial-duty, static discharge reel from Reelcraft Industries stores up to 100 feet of high-visibility orange nylon jacketed cable. The manual rewind reel, when properly clamped to a ground, dissipates static electrical buildup, reducing the chance of sparking. 800/444-3134; www.reelcraft.com.

Ramvac HX-12 hydroexcavator

The HX-12 hydroexcavator from Ramvac has a 12-cubic-yard debris tank, temperature-controlled environmental chamber and directional discharge system for off-loading spoils into the excavation site. 800/323-1604; www.ram-vac.com.

Snap-on industrial torque wrench

The Control Tech industrial torque wrench from Snap-on Industrial features all-steel construction and backlit LCD screen with storage capacity for 1,500 readings. Other features include 3/8- or 1/2-inch drive, flex- or interchangeable heads, 40 memory presets, LED indicator lights, and audible alert and handle vibration that signal when torque is within targeted range. 773/491-9500; www.snapon.com.

Water Cannon jetter package

The XT jetter package from Water Cannon delivers up to 5.5 gpm and pressure to 4,200 psi. It functions as a drain cleaner and high-power pressure washer. Powered by a Honda GX 630 engine, it is available with an Annovi Reverberi or General Pump. Features include pulsation on demand, adjustable throttle control from 100 psi and up, and ball valve shut-off. The 15-gallon fuel tank, electric key start and portable wheel kit are included. Accessories include Hosetract hose reel to handle 300 feet of 3/8-inch Piranha jetter hose, 125 feet of 1/4-inch hose and four stainless steel nozzles. 800/333-9274; www.watercannon.com.