Browse the latest products exclusively for the municipal sewer and water industry
Endress+Hauser CA80TP phosphorus analyzer
The Liquiline CA80TP phosphorus analyzer from Endress+Hauser monitors industrial wastewater, and inlet and outlet streams of municipal wastewater treatment plants. It uses a thermal digestion technique along with colorimatric analysis, requiring only a small quantity of reagents. The phosphorus measurement is performed online, and is less time consuming than sending to a lab for analysis. It measures phosphorus in ranges of .05 to 10 mg/l or .5 to 50 mg/l. It has two 4-20mA outputs with the option for additional outputs including the Modbus RS485, Modbus TCP and Ethernet/IP. 888/363-7377; www.us.endress.com/ca80tp.
Fluid Conservation Systems Multi-Log LX-2
The Multi-Log LX-2 from Fluid Conservation Systems is a battery powered, multiple channel data logger for flow and pressure monitoring in water distribution networks. The device builds upon its predecessor with the addition of remote data transfer and upgraded processing abilities. The LX-2 also has a serial input that enables it to connect to a wide range of leak noise and ultrasonic level sensors and water meters. It is designed to fit inside very shallow valve box installations and is IP68-rated fully waterproof. 800/531-5465; www.fluidconservation.com.
Felling Trailers Turret Reel Trailer
The FT-10 R Turret Reel Trailer from Felling Trailers has a 360-degree rotating turret assembly so virtually no right-of-way or easement will prohibit the operation. To activate, pull to the side of the road, disengage the level-actuated locking pin and rotate the reel to the direction needed. The turret can lock into any position in 15-degree increments. The optional 16-inch bronze tensioning brake controls the overspin of the reel and provides tension as the material is being pulled off the trailer. The brake assembly has an infinitely adjustable manual brake caliper and up to 50,000 pounds of torque. 888/335-5464; www.felling.com.
Cat Pumps plunger pump Model 67070
The Model 67070 high-pressure plunger pump from Cat Pumps is ideal for sewer jetting and hydroexcavating applications requiring high-flow performance at higher pressures and intermittent duty operation. It is rated at 50 gpm at 2,000 psi. The drive-end of the pump is built from the 60-frame mechanical drive, and oversized, premium crankshaft bearings offer high loading capacity and prolonged bearing life. The crankcase crosshead area is concentric with a 360-degree plunger rod support that features a drilled-through oil port to lubricate the front side of the crosshead area. 763/780-5440; www.catpumps.com.