Product News - September 2012

Product News - September 2012

Interested in Infrastructure?

Get Infrastructure articles, news and videos right in your inbox! Sign up now.

Infrastructure + Get Alerts

Hayward Flow Control
filter bags

The expanded Filter Bag line from Hayward Flow Control includes sizes 1 (16 inches) and 2 (32 inches) with polypropylene, polyester and nylon material options. The expanded filter line includes needle felt and monofilament mesh in sewn or welded construction. Available with 1-800 micron rating with PP rings or flanges, all bag materials are silicon free. Size 1 bags have a 90 gpm flow rate and size 2 bags have a 180 gpm flow rate. 888/429-4635;

Val-Matic Dual Disc check valve

The Dual Disc check valve from Val-Matic features non-slam, spring-assisted closing, pressure-sensitive vulcanized seat for tight closure at both low
and high pressures and lift and pivot action to reduce seat wear. The valve is available in sizes from 2 to 60 inches for pressure up to 500 psi in Wafer (ANSI 125, ISO PN10, ISO PN16), Lug and Grooved End connections. 630/941-7600;

RIDGID folding pipe stand

The VF-99 folding pipe stand from RIDGID is designed for joining pipes up to 12 inches in diameter and up to 2,500 pounds. The 24-pound stand features folding rectangular profile legs (27 inches in diameter open, 7 inches closed) and comes with an ergonomic V-handle that adjusts from 28 to 58 inches high and a locking ring to hold the stand in place. 800/769-7743;

KSB Sewatec volute casing pump

The Sewatec dry-installed volute casing pump from KSB is designed for wastewater transport and treatment, sludge handling and stormwater applications. Features include a flexible hydraulic design, two mechanical seals to protect against failure, even during extended use and fluctuating conditions.
The pump line has a diameter of 2 to 28 inches, maximum flow rate of 15,000 gpm, heads to 320 feet and liquid temperature limit of 158 degrees F. Cleanout openings in pump volute are standard beginning with 4-inch models. 804/222-1818;

Jenny direct-drive cold pressure washer

Steam Jenny direct-drive cold pressure washers from Jenny Products are powered by 9 or 13 hp Honda GX Series engines and feature a triplex ceramic plunger pump. Pressures range from 3,000 to 4,000 psi with flow from 3 to 4 gpm. The washers have thermal pump protection, unloader valve and high-pressure relief valve to protect the pump. The engine automatically shuts down if low oil levels are detected. The powder-coated chassis is made from 7-gauge steel. 814/445-3400;


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.