It's All Inside

2013 Pumper & Cleaner Environmental Expo will feature the best tools and equipment to improve your utility.
It's All Inside

Ask any regular attendee of the Pumper & Cleaner Environmental Expo International what keeps bringing them back and they'll say it's seeing the latest products and services in one gigantic location.

With hundreds of vendors in Indianapolis this year, it'll be a challenge to see it all.

To make sure you don't miss out on any of the breakthrough industry offerings at the Indiana Convention Center, there's an interactive floor plan on the Exposition website (www.pumpershow.com) to help plan your visit. Whether you're a first-time visitor or longtime guest, we're certain the 33rd annual Expo will have all you need to build efficiency and profitability for your utility.

Here's a look at some of the products and services you won't want to miss.

Pipe Repair

ACE DuraFlo Systems

ePIPE FRS high-performing epoxy resin lining from ACE DuraFlo Systems is designed for in-situ application in domestic hot and cold water piping systems down to 1/2-inch diameter. It can repair pinhole leaks, provide corrosion control and prevent lead leaching. 800/359-6369; www.epipeinfo.com; Booth 1460.

Avanti International

Sure Lift urethane foam from Avanti International is designed for lifting concrete slabs, under-sealing and stabilizing soils in highways, foundations and industrial floors. It is available in slow and fast versions for greater control of set times. The two-component, polyurethane foam is available in 5-gallon pails, 55-gallon drums and 270-gallon totes. 800/877-2570; www.avantigrout.com; Booth 5213.

Cretex Specialty Products

Easy Seal SG spray-applied sealant from Cretex Specialty Products is designed for the frame/chimney area of manholes. The cartridge system, loaded into a pneumatic gun with attached air hose, requires no preparation or messy cleanup. The sealant is a two-part, solvent-free polyurethane that is mixed in the disposable spray tips. 800/345-3764; www.cretexseals.com; Booth 1233.

Formadrain

DURAPOX epoxy resin from Formadrain has a 60-day shelf life, adding flexibility to trenchless repairs. The resin remains in a pre-cured state until steam is applied during the installation process. The resin can be used in the repair of both laterals and mains in pipe up to 48 inches in diameter. 888/337-6764; www.formadrain.com; Booth 1244.

Infratech Infrastructure Technologies

The Monoform ABS interior manhole forming system from Infratech Infrastructure Technologies is made for pouring new concrete walls and bases for complete rehabilitation of manholes. Designed to exceed H-20 traffic loading requirements, restoration is completed without traffic detours or disruption to adjacent utilities. Custom forms for lift station rehab or retrofit and installation are available. 763/428-6488; www.infratechonline.com; Booth 6322.

Madewell Products Corp.

The PortaMortar application machine from Madewell Products Corp. mixes, pumps and sprays high-build restoration mortar and 100 percent solids epoxy coatings in difficult-to-reach areas. 800/741-8199; www.madewell.net; Booth 1446.

Mainline Backflow Products

The Straight Through Extendible Backwater Valve from Mainline Backflow Products is available in 4- and 6-inch diameters. Made of PVC DWV, the valve body can be extended to any desired depth by gluing the riser pipe into the valve body and extending it to ground level. A test gate is available. 877/734-8691; www.backwatervalve.com; Booth 1333.

Nu Flow Technologies

Nu Pipe Light Duty blown-in epoxy coating system from Nu Flow Technologies completely coats the inside of a variety of pipe systems, including copper and galvanized. The system is designed for use in 1/2- to 2-inch-diameter pipes in residential buildings with up to 40 connections. The potable epoxies are UL certified for drinking water. 800/834-9597; www.nuflowtech.com; Booth 4109.

Parson Environmental Products

The Pro50 Starter Manhole Rehabilitation Equipment system portable pump and mixer from Parson Environmental Products are separate units powered by a 110-volt circuit. An onboard computer balances the spray rate with the pumping volume to prevent clogging. The accessory diaphragm compressor delivers high-volume output with low pressure to ensure complete and even application. 800/356-9023; www.parsonenvironmental.com; Booths 4320, 4321.

Rausch Electronics USA

The Joint Pressure Testing system from Rausch Electronics USA is mounted to the Rausch L135 tractor and pushed through pipelines 8 to 24 inches in diameter where joints can be isolated and tested for leaks. The KS135 camera is mounted inside the JPT for positioning over the joint. 877/728-7241; www.rauschtv-usa.com; Booth 6137.

Reed Manufacturing

DM2100 drilling machines from Reed Manufacturing can cut or drill through cast iron, ductile iron, C900 PVC and PE water mains while under pressure. The machines use Reed D series drill bits or hole cutters. A variety of kits are available for drilling 3/4- to 2-inch pipe. 800/666-3691; www.reedmfgco.com; Booth 1083.

Sauereisen

SewerGard No. 210X standalone, high-strength, 100-percent solids epoxy polymer lining from Sauereisen exceeds 15,000 psi and 12.9 percent elongation. Designed to protect concrete, masonry, brick and steel substrates, the coating resists hydrogen sulfide and sulfuric acid. It contains no VOCs. One gallon covers 20 square feet at 80 mils. 412/963-0303; www.sauereisen.com; Booth 6140.

Safety Sewer Drain

The Safety Sewer Drain eliminates the mess and threat of contamination when removing the cleanout on a plugged drain. Made of clear polypropylene, the device fits over a 4-inch cleanout. Sewage drains through a valve-controlled hose into a bucket for disposal. The drain can be adapted to work on a 3-inch cleanout. 906/753-4002; www.safetysewerdrain.com; Booth 6064.

Savatech Corp.

Large, multi-size, pillow-shaped pneumatic blocking and bypass plugs for 24- to 120-inch diameter pipes from Savatech Corp. are made from Kevlar-reinforced rubber to resist wear and age while providing extra strength. Plugs can be used in large round, oval or elliptical pipelines, (concrete, plastic and iron) and folded lengthwise and inserted through tight access points. 888/436-9778; www.savatech.com; Booth 5453.

Sewer Seal Technologies

CureLight UV-curable resin from Sewer Seal Technologies is designed for use in underground structures, water and wastewater treatment plants. It also is available as a fiberglass and UV-curable resin composite patch that bonds to concrete, block and brick. It is hand-applied in the field and cures in seconds with a hand-held UV light. 513/253-8461, Booth 4348.

Superior Signal Company

The Model 25 High Output smoke blower from Superior Signal Company can be configured with smoke candles and/or smoke fluid to detect sources of inflow and other faults in sewer lines. The blower blasts 4,000 cfm of smoke at 4.0 static pressure, fits standard manholes and has a second outlet to blow into pipes and other openings. 800/945-8378; www.superiorsignal.com; Booth 2323.

Turbo Fog

The MH-75 manhole smoke blower from Turbo Fog is a self-contained smoke tester for identifying leaks in municipal collection lines. The tester uses aerosol smoke cartridges. No additional smoke bombs or garden sprayers are required. Made of 11-gauge, powder coated steel, the blower generates 7,500 cfm and is available with Briggs & Stratton or Honda engines. 800/394-0678; www.turbo-fog.com; Booth 6116.

Pipe Bursting

RODDIE

The low-pressure lateral pipe bursting machine from Roddie slides apart into two pieces, weighing 65 pounds each, and can be re-assembled by hand in the excavation pit. The system can be powered and controlled by an on-site tractor and will pull 30 tons at 2,800 psi and 50 tons at 4,700 psi. A portable hydraulic power pack is available. 408/224-7777; www.roddieunderground.com; Booth 4237.

TRIC Tools

The X20 lateral bursting system from TRIC Tools features a monolithic, gun-drilled hard aluminum cylinder body and steel pulling bridge. The 60-pound puller is designed for 4-inch residential sewer bursting. The assembly includes puller (8 inches by 27 by 5.25 retracted), pulley base (12 inches by 13 by 14) and resistance plate (24 inches by 24 by 1). 888/883-8742; www.trictools.com; Booth 5354.

Lining Systems

AMerik Engineering

The 7-minute Top Seal lateral sealing system from AMerik Engineering features a resin-impregnated fiberglass laminate cured with ultraviolet light, a cutter to reopen laterals in relined pipes from 6 to 22 inches, Fiber Spot Repair sectional steam-cured liner (45 minutes curing time) and Pipe Ferret self-propelled cutter with camera for 4- and 6-inch pipes. 770/924-2899; www.amerikengineering.com; Booth 6148.

AP/M Permaform

The CentriPipe centrifugally cast concrete pipe system from AP/M Permaform is designed for the structural lining of culverts. Using a spin caster and PL-8000 mortar, the process provides waterproofing, sealing, structural reinforcement and corrosion protection. It contains a rust inhibitor and is abrasion resistant. 800/662-6465; www.permaform.net; Booth 2113.

CIPP Services

Turn-key, custom-built lining equipment from CIPP Services includes wet-out conveyors, static resin mixers, air inverters and shooters, water inversion equipment, refrigerated transport trailers with hydraulic liner loading/unloading systems, hot water boiler trucks (up to 16 million Btus) and steam trucks (up to 150 hp). Equipment is available with on-site training. 815/712-8708; www.cipp-services.com; Booth 4347.

Flow-Liner Systems Ltd.

The Multi-System trailer from Flow-Liner Systems Ltd. enables contractors to line 1/2- through 2-inch I.D. potable water services as well as 2- through 6-inch I.D. drains. The trailer also has a robotic cutting system for a finished installation. 800/348-0020; www.flow-liner.com; Booth 4234.

Infrastructure Repair Systems

Mainline and lateral trenchless point repair from Infrastructure Repair Systems is designed for pipe from 3-to-36 inches in diameter and up to 15 feet long. The system includes no-shrink epoxy resin, custom-sewn felt or fiberglass, four liner weight options, no Styrene or VOCs, flow-through mainline carrier and push or pull lateral carrier. 877/327-4216; www.irsi.net; Booths 2469, 2470.

LMK Technologies

The portable Power Cure mini steam cure unit from LMK Technologies can be maneuvered into areas too small for boiler trucks and other large equipment. It can cure lateral and sectional liners in approximately 30 minutes. The unit is compatible with all types of CIPP linings and thermoset resins. 815/433-1275; www.lmktechnologies.com; Booth 1354.

MaxLiner USA

The cured-in-place pipe relining system from MaxLiner USA repairs laterals without digging up yards, sidewalks or damaging interior walls, as well as vertical drain pipes behind walls and beneath floors. 276/656-1225; www.maxlinerusa.com; Booth 1160.

Perma-Liner Industries

Perma-Main continuous lining F-10, F-18 and F-24 Top Guns from Perma-Liner Industries can invert 700 feet in one setup. The unit's design enables quick installs on 6- to 24-inch lines and rapid cure times using the portable Viper Steam Cure System. Turnkey trailers available. 866/336-2568; www.perma-liner.com; Booth 3223.

Pipe Lining Supply

Lateral lining felt from Pipe Lining Supply has a poly scrim built into the felt to minimize stretching, along with a polyurethane coating and stitched seam. The Quik-Pox epoxy resin is formulated with surfactants that make it easier to be absorbed into the felt liner and invert. A thickening agent eliminates resin migration. 714/630-6311; www.pipeliningsupply.com; Booth 6302.

PrimeLine Products

Cured-in-place sectional lining equipment and materials from PrimeLine Products are offered ala carte and in bulk quantities. Products include plugs, manhole/wetwell rehabilitation, chemical grouting, resins, fiberglass cloth, smoke testing and cleaning nozzles. 877/409-7888; www.prime-line.net; Booth 5360.

Quadex

Interfit lateral connection rehabilitation technology from Quadex extends from the main 12 to 20 inches into the lateral, sealing the annular space between a main liner and host pipe, lateral connection and first joint. The system includes a 360-degree CIP fiberglass sock in the main that helps anchor the lateral portion of the sock. 870/758-8628; www.quadexonline.com; Booth 1071.

Quik Lining Systems

CIPP sewer lateral lining from Quik Lining Systems can be installed from the wet-out stage without transporting, storing or loading it into a launching device. Unlimited lengths of 3- through 8-inch- diameter resin-impregnated liner can be installed. The pinch roller enables precise calibration up to 10 inches in diameter and thicknesses from 2 mm to 100 mm. 714/296-5262; www.quiklining.com; Booth 6300.

Saertex multiCom

The UV-cure Saertex-Liner from Saertex multiCom is designed for the rehabilitation of sanitary sewers and storm pipes. Features include a high flexural modulus and flexural strength for a tight fit and high strength. The liner is available in 6- through 52-inch diameters, as well as irregular shapes and transitions. 866/921-5186; www.saertex-multicom.com; Booth 2262.

Trelleborg Pipe Seals Millford

Designed for lateral pipe rehabilitation with bends and diameter transitions. The polyester needle fleece liner with TPU coating is able to negotiate multiple 90-degree bends with minimal wrinkles and can bridge pipe diameters up to two dimensions (4 to 6 inches, 8 to 10 inches) while retaining minimum wall thickness. 800/626-2180; www.trellborg.com/npc, Booth 1211.

Inspection Systems

Allan J. Coleman Co.

The Gvision S/3000 monitor from EPL Solutions, distributed by Allan J. Coleman Co., records video directly onto the photo app of an iPhone, iPad or iPod. Weighing 8.5 pounds, it also records onto a USB thumb drive or hard drive. The monitor pivots on its cover/stand and can be mounted on camera reels for eye-level viewing. 773/728-2400; www.allanjcoleman.com; Booth 3136.

Aries Industries

The LETS (lateral evaluation television system) wheeled tractor from Aries Industries can inspect mainline sewers 36 inches in diameter and launch into and televise laterals 3 inches in diameter. Mainline video is viewed through a fixed-mounted camera on the crawler. Lateral video is produced by a pan-and-tilt push camera with self-cleaning wiper. 800/234-7205; www.ariesindustries.com; Booth 5158.

Cobra Technologies

The Portable Inspection System from Cobra Technologies offers the functionality of a truck-mounted system in a go-anywhere package. Features include full Cobra data collection capabilities, including MPEG video that operates with any Cobra 6- and 8-inch crawler/camera. The system weighs 130 pounds and can be mounted to ATVs or trailers. 800/443-3761; www.cobratec.com; Booth 3212.

CUES

The semi-autonomous, high-resolution, digital universal camera (DUC) from CUES is designed for rapid and detailed condition assessment. The side-scanning camera, when used with CUES asset-based Granite XP decision support software, can inspect 5,000 feet of pipe per day. The system produces a continuous hemispherical scan in 6- to 60-inch pipe. 800/327-7791; www.cuesinc.com; Booth 5016.

Electric Eel

The eCAM Pro 2 pipeline inspection camera system from Electric Eel features a stainless steel-housed, 1.68-inch self-leveling camera with sapphire lens, 20-LED light ring and high-resolution CCD element. A flexible camera spring is designed to navigate 3-inch P-traps. The system includes 200 feet of 1/2-inch pushrod and 512 Hz sonde. 800/833-1212; www.electriceel.com; Booth 4156.

Envirosight

ROVVER Measurement Suite image-analysis software for the ROVVER X pipe inspection crawler from Envirosight enables the operator to measure a variety of pipe attributes from the system's touch-screen control pendant. Using adjustable overlays, the software calculates flow level; pipe diameter, bend and offset; branch angle; clock position; and diameter of service connections. 866/936-8476; www.envirosight.com; Booth 6018.

General Pipe Cleaners/General Wire Spring

The Gen-Eye Micro-Scope handheld inspection tool from General Pipe Cleaners/General Wire Spring is designed to inspect small drain lines, toilet traps and hard-to-reach places. The monitor connects to the reel with an adjustable mount. Features include 100 feet of micro pushrod, 39-inch probe rod, and three attachments to improve viewing angle or retrieve objects. 800/245-6200; www.drainbrain.com; Booth 6412.

MTech

The combination CCTV/Electro Scan truck accessory from MTech automatically identifies and quantifies cracks, joints and service connection defects in sewer mains and laterals. Model ES-38 is designed for 3- to 8-inch diameter sewer laterals and Model ES-620 for 6- to 20-inch sewer mains. 800/362-0240; www.mtechcompany.com; Booth 2215.

Pipeline Analytics

WinCan ProTouch pipe inspection software from Pipeline Analytics is designed for touch-screen data entry on a tablet PC. Fully compatible with WinCan v8, the software generates basic manhole-to-manhole reports that include schematics and captured images. Captured data uploads to WinCan v8 for advanced reporting, filtering/querying and GIOS integration. The software works with common video inspection hardware. 877/626-8386; www.pipelineanalytics.com; Booth 6018.

RapidView IBAK North America

The Polaris camera system from RapidView IBAK North America is designed for inspecting smaller diameter pipelines. Features include a 3-axis range of movement that enables the unit to choose the direction of travel when encountering tees or wyes. Other features include upright picture control, pan, tilt and angle control, wide-angle view (120 degrees) and built-in laser measurement. 800/656-4225; www.rapidview.com; Booth 2207.

Ratech Electronics Ltd.

The integrated cellphone interface from Ratech Electronics Ltd. records directly to an iPhone, iPad or iPod, enabling users to upload pipe inspection video from the jobsite to YouTube for customer viewing. The interface is adaptable to any Ratech system. Included is an on-screen display overlay, providing distance counter, time, date and eight pages of memory. 800/461-9200; www.ratech-electronics.com; Booth 5140.

RIDGID

The SeeSnake Max rM200 camera system from RIDGID is made for inspection lines up to 200 feet in length and 1.5 to 6 inches in diameter. Features include improved reel mechanics for easier passage through tight turns, compact camera and abrasion-resistant cable. The system is compatible with SeeSnake monitors, including CS10 and CS1000 digital recording machines. 800/769-7743; www.ridgid.com; Booth 1243.

Rothenberger USA

The Roscope 1000 video scope self-leveling color inspection camera from Rothenberger USA is designed for duct, drain and pipe inspection. The camera head keeps the picture upright and prevents loss of orientation. Features include zoom, scroll, picture and video recording, and ergonomic shape for single-hand operation. 800/545-7698; www.rothenberger-usa.com; Booth 1321.

RS Technical Services

The TranSTAR II tractor and TrakSTAR II camera combination for video pipeline inspection from RS Technical Services has a pan-tilt-zoom camera for sanitary or storm lines 6 inches in diameter and larger and up to 3,000 feet in length. The 14-inch-long tractor has dual 90-watt motors and can achieve speeds up to 70 feet per minute. 800/767-1974; www.rstechserv.com; Booth 2431.

RVI Pro

The mini13 pipe inspection system from RVI Pro features a 13 mm by 6 mm camera head with 15 meters of push/pull cable (30 meter cable and sonde transmitter available), integrated 3.5-inch LCD monitor with image capture and video recording and AC/DC operation contained in a shatter-proof housing with reel. 219/395-1963; Booth 6247.

Spartan Tool

The iPad sewer lateral inspection camera from Spartan Tool uses an iPad as a viewing screen and processor. Self-contained and weighing 28 pounds, the system has 200 feet of pushrod, self-leveling camera head, 512 Hz beacon and full iPad touch-screen capabilities. Users can record or take snapshots at any time, edit video or photos, and record voice. 800/435-3866; www.spartantool.com; Booth 5024.

Vivax-Metrotech Corp.

The vCam-5 inspection system from Vivax-Metrotech Corp. features a lightweight, compact control module with 8-inch color LCD, dual frequency transmitting sonde and digital recording to the internal 300 GB hard drive, USB thumb drive or SD card. The system can inspect pipe 3 to 12 inches in diameter and distance from 100 to 400 feet. 800/446-3392; www.vxmt.com; Booth 4233.

Western Mule Cranes

The P-5A 1,000-pound capacity telescoping boom crane from Western Mule Cranes is designed for CCTV pipeline inspection applications. Operated with a 10-foot, handheld pendent control, the crane with boom folds and stores parallel to the mast, requiring 14 by 14 inches of floor space. A positive rotation-lock secures the boom at 12 fixed points of rotation. 800/288-6853; www.westernmule.com; Booths 4338, 4339.

Wohler USA

The relining adapter kit for efficient pipe repair from Wohler USA is available for VIS2xx and VIS3xx visual inspection camera systems. The kit comes with centering star to ensure the camera remains on the bottom of the lateral and three protection sleeves that prevent the camera cable from being cut by the saw during re-instatement. 978/750-9876; www.wohlerusa.com; Booth 1456.

Pipe Cleaning

Bowman Tool Company & Systems

The Dominator 430 reinstatement cutter from Bowman Tool Company & Systems is designed to operate in 6- to 30-inch relined pipe. The 72-pound cutter is made from a solid billet of stainless steel and features a pinion-less, quick-change design with one adjustable gib. Electric motors are isolated in a watertight chamber. 714/432-1403; www.bowmantool.com; Booth 5251.

Cam Spray

The RCJ skid-mount jetter series from Cam Spray is available in flows and pressures of 12 gpm at 2,700 psi, 8 gpm at 3,500 psi and 7 gpm at 4,000 psi. Features include a three-plunger industrial pump powered by a 688cc Honda engine and 200 feet of jetter hose. 800/648-5011; www.camspray.com; Booth 2300.

Chempace Corp.

Sewer Foam from Chempace Corp. assists in removing solids buildup in sewer lines when added to jet truck water. The foaming action cleans while live bacteria left behind help prevent solids from reforming. 800/423-5350; www.chempace.com; Booth 1472.

Chempure Products Corp.

Root Rat cutting nozzles from Chempure Products Corp., designed for use with jetters as small as 11 hp, are available in 3/8-, 1/2-, 3/4- and 1-inch sizes. Made of hardened stainless steel, the cutters come with toolbox and interchangeable rotors: one with cables and one with chains. The combination kit includes extra chain, cable and bearings. 800/288-7873; www.chempure.com; Booth 4004.

ENZ USA

Turbopuls rotating vibration nozzles from ENZ USA in 1/2- and 3/4-inch connection sizes are designed for use in recycling water. Maintenance-free ball bearings ensure optimal rotation. Vibration impulses from inside the nozzle are transferred to the working head to gently loosen hard deposits in HDPE plastic, steel and concrete pipe. 877/369-8721; www.enzusainc.com; Booths 1193, 1197.

GPM Pump and Truck Parts & Service

The Sewer Duck jetter from GPM Pump and Truck Parts & Service can be custom built to needed specifications. Options include Myers E80-25 and D65-20 pumps, choice of Cummins engines and cold weather systems. 630/543-7373; www.gpmpumptruckparts.com; Booth 2100.

Hammelmann Corp.

The XXL automatic tank cleaning head from Hammelmann Corp. is designed to remove hard scale buildup from large tanks and pipes. Using high-pressure water, the nozzle arm rotates the cleaner around its vertical axis. The head can be operated with pressures up to 23,000 psi and flow rates of 150 gpm. 800/783-4935; www.hammelmann.com; Booth 3109.

Logiball

The Lateral Cleaning Launcher from Logiball guides 1/2- or 3/8-inch hose and nozzles into the lateral connection from the mainline sewer. Winched in tandem with a CCTV camera, the 0-9 VDC motor rotates the guiding arm and nozzle into the lateral. Back jets propel the hose up to 70 feet for cleaning and cutting roots. 800/246-5988; www.logiball.com; Booth 5227.

NozzTeq

The BL Swiper sewer nozzle from NozzTeq features stainless steel construction with green poly coating. Stainless steel tubes loop water along the air channels for increased air flow and jet stream, reducing pressure at the truck. It is designed for 12- to 30-inch lines and the small BL Swiper cleans 6- to 18-inch lines. Stainless/ceramic jets available. 866/620-5915; www.nozzteq.com; Booth 1250.

Shark Pressure Washers & Jetters

The SJPE-1500 portable jetter from Shark Pressure Washers & Jetters operates on 115-volt electricity and delivers 1.7 gpm at 1,500 psi. Features include 35-foot power cord, detachable hose reel and a slide-in handle to accommodate loading and unloading. Designed for 2- to 4-inch pipes, the jetter has a steel roll cage chassis, triplex pump and Baldor motor. 800/771-1881; www.sharkpw.com; Booth 6324.

StoneAge

The Manhole Cleaner pipe cleaning tool from StoneAge features jets directed at the manhole walls. Conversion requires exchanging the standard WG 040 head with the Manhole Cleaner head kits that include a head with 1/2-inch extension arms and nozzles. 866/795-1586; www.stoneagetools.com; Booth 5130.

USB - Sewer Equipment Corp.

The Turbo III flexible chain cutter from USB - Sewer Equipment Corp. features a teardrop-shaped skid made of temperate stainless steel. The chain retainer, driven by a high-performance turbine, removes roots, grease and mineral deposits from 10- to 20-inch sewer lines (up to 30 inches with extension kit). The guide skid can be adjusted in 1/16-inch increments. 866/408-2814; www.usbsec.com; Booth 5043.

Excavation, Waste Handling

Ditch Witch

The FX50 vacuum excavation system from Ditch Witch delivers 49 hp and is available with a variety of tank sizes, trailer configurations, hydraulic booms, water heaters and hydraulic valve exercisers. The system comes with a choice of four spoils tanks (300 to 1,200 gallons) and four water tanks (80 to 500 gallons). 800/654-6481; www.ditchwitch.com; Booth 5216.

Supervac 2000

The 6400 hydroexcavator from Supervac 2000 has a 4,200-gallon debris tank and 6,400 cfm vacuum pump with 72 inches Hg. The unit features a 1,250-gallon water tank, two cyclones and cartridge filter, 6,000 psi water pump and 26-foot-radius hydraulic boom. Other features include hydraulic door locks, insulated enclosure (less than 85 dBA) and 100-foot hose reel capacity. 866/839-5702; www.supervac2000.com; Booth 6036.

Westmoor Ltd.

The Conde ProVac industrial liquid waste pumping system from Westmoor Ltd. is designed for grease trap and other industrial pumping. Pumping 120 gpm, a flip of the switch starts the vacuum mode. A built-in exhaust deodorizer keeps odor at a minimum. A flip of the switch turns on the pressure mode for offloading. 800/367-0972; www.westmoorlrd.com; Booth 5124.

Pumps

Gorman-Rupp Co.

The Prime Aire Plus line of pumps from Gorman-Rupp Co. features up to 8-inch flanged discharge sizes, flows up to 4,950 gpm and heads to 475 feet. Designed for clear liquids and large solids, pumps are coupled to the latest EPA Tier-compliant engines or energy-efficient electric motors. 419/755-1251; www.grpumps.com; Booth 1239.

Rain for Rent

The Total Dynamic Head Calculator app for iOS devices from Rain for Rent is based on Hazen-Williams equations. Users enter the hydraulic parameters of their pumping system and the app returns TDH. It estimates both suction-side and discharge-side hydraulic losses, features NPSH estimation, and suggests combinations of standard pipe materials and pipe sizes. 800/742-7246; www.rainforrent.com; Booth 1227.

Thompson Pump & Manufacturing Company

The HT trash pump from Thompson Pump & Manufacturing Company is designed to handle large solids and abrasive materials. Pumps can handle up to 3-inch solids and are available in 4-, 6- and 8-inch sizes with performance up to 2,600 gpm and 168 feet of head. 800/767-7310; www.thompsonpump.com; Booth 4014.

Truck Accessories

Air-Weigh Scales

The LoadMaxx on-board scale from Air-Weigh Scales provides weight information for drive suspension, steer suspension, lift axle, GVW and net payload. The on-screen menu enables setup and calibration. Weights are displayed on an in-cab display. An alarm warns drivers when they are reaching maximum legal weight. 888/459-3444; www.air-weigh.com; Booth 2278.

Pelican Worldwide

The solid brass lever valve for vacuum trucks from Pelican Worldwide is available in 2-, 3-, 4- and 6-inch sizes. The easy-opening, lever-action slider valve is made of brass with threaded connections. 713/862-5557; www.pelicanww.com; Booth 1112.

Reels, Hoses

Hannay Reels

The HDD6200 series jetting hose reel from Hannay Reels has a heavy-duty swivel base, guide arm and operator handle for precise payout. Rotating ball bearings enable the swivel base to move freely in any mounting position. The reel handles high-pressure liquids through a single 3/4-inch to 1-inch I.D. hose. 877/467-3357; www.hannay.com; Booth 5027.

Kuriyama of America

Tigerflex Amphibian abrasion-resistant, polyurethane-lined suction hose from Kuriyama of America is designed for wet and dry applications. The static dissipative cover helps prevent the buildup of static electricity. Cold-Flex materials enable the hose to remain flexible in subzero temperatures. The oil-resistant liner resists most animal and petroleum-based oils. 847/755-0360; www.kuriyama.com; Booth 3021.

Piranha Hose Products

The 1 1/2-inch, 2,500 psi sewer cleaning hose from Piranha Hose Products features a yellow, polyolefin tube, double layer of high-tensile synthetic braid reinforcement and abrasion-resistant orange cover. Temperate range is -40 to 150 degrees F. The Slither cover is available for tough sewer bends. 800/250-5132; www.piranhahose.com; Booth 3017.

Reelcraft Industries

Series SD10000 low-profile, spring retractable hose reels from Reelcraft Industries are designed to hold up to 50 feet of 3/4- and 1-inch hose for air, water, oil, fuel and vacuum recovery. Features include external drive spring and all-bolted frame. The low profile is suited for mounting in truck cabinets and limited-space areas. 800/444-3134; www.reelcraft.com; Booth 1373.

Southland Tool Mfg.

The Jersey Roller sewer hose protector from Southland Tool Mfg. fits over the top of concrete highway barriers and locks into place with two 3/4-inch bolts. 714/632-8198; www.southlandtool.com; Booth 3001.

SPIR STAR

The 3/6 Blast-Pro flex lance from SPIR STAR has a 1/2 inch end fitting O.D. and 40,000 psi working pressure. It is available with 1/4-inch 28 and 3/8-inch 24 male nipple ends and can be used in 40,000 tube cleaning with the StoneAge Banshee BN13 nozzle. 800/890-7827; www.spirstar.com; Booth 2002.

UEMSI

RAM hose reel swivels from UEMSI are available in straight and 90-degree configurations in 3/4-, 1- and 1 1/4-inch sizes. The steel-cast swivels feature heat-treated rotary sleeves and gland nuts, nickel-plated backup ring and zerk fitting. 800/666-0766; www.uemsi.com; Booth 1264.

Dewatering

Aqua-Zyme Disposal Systems

The ADS 30-yard (15-yard available), open-top, roll-off dewatering unit from Aqua-Zyne Disposal Systems can be filled with 22,000 to 25,000 gallons of wastewater treatment sludge, septic and/or grease trap waste at 1 to 2 percent solids in approximately two hours. Sludge volume is reduced up to 80 percent with 98-percent reduction in BOD, COD, FOG and TSS. 979/245-5656; www.aqua-zyme.com; Booth 2091.

Bright Technologies

The 1.7-meter, trailer-mounted rental system belt press from Bright Technologies has a non-potable water belt wash booster pump, folding discharge conveyor with belt tracking, VFD controlled rotary lobe sludge pump and liquid polymer activation system. Rental units are made for rapid setup, with folding conveyor and operator walkways. No special lifting equipment required. 800/253-0532; www.brightbeltpress.com; Booths 4223, 4224.

Safety

BW Technologies by Honeywell

GasAlertMax XT II monitors from BW Technologies by Honeywell detect H2S, CO, O2 and combustibles. Fully compatible with the MicroDock II automated test and calibration system, the unit features one-button operation and motorized pump for intelligent, remote sampling and multi-sensory alarms, including visual, audible and vibrating. The pump inlet has a quick-connect for accessories. 888/749-8878; www.gasmonitors.com; Booth 4138.

Milwaukee Rubber Products

The GasAlertQuattro gas detector from Milwaukee Rubber Products features one-button operation. The graphic LCD displays information icons, including bump test and calibration status for on-site auditing. IntelliFlash provides continuous visual confirmation of detector operation and compliance. The unit is fully compatible with BW Technologies by Honeywell's MicroDock II automatic test and calibration system. 800/325-3730; www.milwaukeerubber.com; Booth 3032.

US Jetting

Safety clothing and gloves from US Jetting offer protection up to 7,250 psi, including hose bursts and nozzles coming out of pipes. The waterproof gloves with Dyneema fiber have a rough, sand-patterned surface for a solid grip and inner glove for comfort. 800/538-8464; www.usjetting.com; Booths 5333, 5334.

Management Software

C-Tec

AADIOS asset manager software from C-Tec enables users to process laser profiling data on the job site, read the matrix code from the CoolVision laser profiler and TV-Laser Mandrel inspection tools, manage field conditions and verify work in a step-by-step procedure before generating reports that meet DOT and municipal specifications. 866/993-0366; www.ctecworld.com; Booth 3033.

StreetEagle GPS Tracking

The Motorola wireless barcode scanner from StreetEagle GPS Tracking transmits scanned information in real time. Users scan the barcode on each asset when servicing, delivering or picking up, enabling managers to track assets (location, date/time and service verification) in the field. Automated and printable reports ensure proof of service and prevent loss. 301/866-1990; www.streeteaglegps.com; Expo both 2341.

Locating Systems

MyTana Mfg. Company

The MS2011 AccuCane 512 Hz analog locator from MyTana Mfg. Company is designed for simple operation. It locates in PEAK mode only. Depth is determined by signal strength. Vibrations signal the operator to turn down the gain while honing in on the transmitter. 800/328-8170; www.mytana.com; Booth 2200.

Prototek Corp.

The LineFinder LF2200 from Prototek Corp. locates any frequency sonde or transmitter box between 16 Hz and 100 Hz. Features include pre-set support of 16 Hz (steel or ductile iron, cast iron and nonmetallic), 512 Hz (cast iron, nonmetallic) and 8 Hz (nonmetallic) sondes. The locator traces underground metallic lines at four built-in industrial standard frequencies. 800/541-9123; www.prototek.net; Booth 4162.

Excavation

GapVax

The HV Series of wet/dry hydroexcavators from GapVax feature various lift axle combinations, tri-drive and twin-steer chassis, debris bodies from 8 to 15 cubic yards, water tanks from 400 to 1,400 gallons, vacuum pumps from 3,500 to 6,600 cfm, water pumps from 2,000 to 5,800 psi, water heaters from 400,000 to 880,000 Btus and body pressurization off-load. 888/442-7829; www.gapvax.com; Booth 6004.

Innovative Hydrovac Trucks

The IHT2512 Smart Truck hydrovac from Innovative Hydrovac Trucks features built-in interlocks with PLC and software to eliminate most operator-caused truck breakage. The truck has a 50-degree slope debris floor, full-width rear door and high-pressure wash system for offloading and cleaning. It can carry 2,500 gallons of freshwater and 12.5 yards of debris. 970/441-0148; www.hydrovactrucks.us; Booths 1320, 1324, 1422.

Ring-O-Matic

The 550 Hi cfm vacuum excavator from Ring-O-Matic has a 550-gallon spoils tank, 1,000-cfm displacement Gardner Denver blower, 6 gpm at 4,000 psi water pump, full-tilting tank, full-opening rear door and Cyclo-Jet pothole excavator gun. 800/544-2518; www.ring-o-matic.com; Booths 5308, 5309.

Super Products

The Mud Dog 1200 hydroexcavator from Super Products has 12-cubic-yard debris capacity, 1,000-gallon water tank with pump rated at 14 gpm at 3,000 psi. Features include onboard boiler for breaking up frozen ground and positive displacement vacuum pump with airflow rated at 5,800 cfm at 28 inches Hg. The rear-mounted telescoping boom can reach 19 to 27 feet. 800/837-9711; www.superproductsllc.com; Booth 6238.

Vacall Industries

The AllExcavate hydroexcavator from Vacall Industries delivers waterjetting pressure and vacuum forces for cleaning underground utility lines and dirt from trucks. The 8-foot, 6-inch telescoping boom has a 180-degree radius, enabling the unit to perform multiple jobs without repositioning. Features include single-engine operation, aluminum water tanks and AllSmart Flow control system (wired or wireless). 800/382-8302; www.vacallindustries.com; Booth 5230.

Vac-Con

The Power Flex telescoping boom from Vac-Con rotates up to 315 degrees, articulates up to 110 degrees and lifts up to 34 feet. The boom is top-mounted on the debris tank and telescopes out 8 feet for a reach of 28.5 feet from the truck. The boom can be outfitted on combination sewer cleaners, industrial machines and the X-Cavator product line. 904/493-4969; www.vac-con.com; Booth 1190.

Vermeer

The AXIS laser guided boring system from Vermeer is a pit-launched tool designed to install 10- to 14-inch pipe. The system consists of four main components (power unit, rack, vacuum pump and vacuum tank), offers pinpoint, on-grade accuracy and has the ability to install up to 350 feet of steel, clay, HDPE or PVC pipe in one bore. 888/837-6337; www.vermeer.com; Booth 2417.

Waste Handling

Guzzler Mfg.

The upgraded Classic industrial vacuum loader from Guzzler Mfg. features enhanced operator ergonomics and improved air routing, filtration and maintenance. A longer body provides improved material separation. Enlarged bag house and cyclone cleanout access doors provide easier access. Transition to the dump tubes has been widened for more effective dumping. 800/627-3171; www.guzzler.com; Booth 8076.

PipeHunter

The VacHunter sewer vacuum combination unit from PipeHunter features positive displacement blowers with up to 6-inch vacuum, debris tanks up to 1,250 gallons and water systems to 80 gpm. The unit has a hydraulic-powered boom that works in conjunction with the rear-mounted hose reel for maneuverability and safe working conditions. 800/373-1318; www.pipehunter.com; Booth 6052.



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.