Product News - December 2022

Product News - December 2022

EasyDig 4-foot trench cage for hydrovacs

Designed to be used with a hydrovac, EasyDig’s 4-foot-diameter circular trench cage is new to the excavation industry. A hand-moveable aluminum trench cage breaks down into half-circle pieces that can be moved in the back of a pickup. Each half circle is less than 50 pounds. The latest design is engineered to 28-foot depth, depending on soil conditions. With a built-in access/egress ladder, EasyDig was created specifically for sewer and water utility repairs. This latest version comes with a lid that locks onto the trench cage to keep the excavation safe from passersby. 855-485-3279; www.easydig.ca


VMAC UNDERHOOD40 air compressor

VMAC’s UNDERHOOD 40 Van Series for 2022 Mercedes-Benz Sprinter vans is equipped with a 2.1 L turbo diesel engine. This latest rotary screw air compressor is engineered specifically for 2019-2022 Sprinter vans and produces up to 40 cfm of continuous air at 100 psi, with a 150 psi maximum. The vehicle-integrated air compressor is mounted in the Sprinter’s engine compartment, freeing up to 10 cubic feet in the cargo area. A combined air/oil cooler and air/oil separator tank is the only component installed in the cargo area, taking up only 1.7 cubic feet. The total air compressor system weighs only 85 pounds, which reduces GVW by as much as 290 pounds. 800-738-8622; www.vmacair.com 


Patterson Davit Crane lifts large loads in tight spaces

With a boom that can be adjusted to nearly 45 degrees, the Patterson Davit Crane offers adequate reach and allows for clearance over obstructions such as handrails. The low maintenance, easy-to-assemble design is available in ½-ton and 1-ton capacities and comes standard with a hot-dipped galvanized finish and stainless steel hardware to prevent rust and corrosion in wet work environments. Following Patterson’s tradition of safety-focused innovation, the davit features a reliable brake to keep loads in position without creeping. For over 160 years Patterson has been a trusted supplier of winches, rigging, fittings and custom products for lifting applications. Patterson Davit Cranes are made in the USA and deliver on the company’s promise of helping businesses run safer, easier and faster. 800-322-2018;  www.pattersonmfg.com/davit-cranes


 OZ Lifting Products CompOZite davit crane

OZ Lifting Products’ patented CompOZite davit crane is made of advanced composite materials that make it 40% lighter than equivalent capacity steel davits. With a total weight of only 83 pounds for the boom, mast and winch combined, a single crane is commonly moved to multiple base locations throughout a treatment plant. A ratchet screw jack allows the user to adjust the boom from horizontal to 45 degrees while under load and the 360-degree rotation of the crane allows a full range of motion. Smart-latch technology at the boom/mast means no tools are required for assembly. A zinc-plated finish on all non-composite parts provides added corrosion protection. AC and DC electric winches are optional, or a manual winch comes standard with a drill drive adapter. The cranes are made in the U.S. and each one is individually tested and certified at 125%. 800-749-1064; www.ozliftingproducts.com



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.