Drones to Predict Where Water Pipes Are At Risk of Bursting

Drones to Predict Where Water Pipes Are At Risk of Bursting

Interested in Location/Detection?

Get Location/Detection articles, news and videos right in your inbox! Sign up now.

Location/Detection + Get Alerts

With leaking and burst water pipes costing water authorities and consumers time and money, as well as wasting a precious resource, researchers at the University of Newcastle in the United Kingdom are developing drone technology to help predict which areas, and even which specific pipes, are at risk of water loss through corrosion.

The risk of degradation of the underground water supply network depends on the age of cast iron pipes and the amount of moisture in the ground surrounding them and until quite recently, was assessed based on knowing its age and observing the pipes. More recently, sensor devices have been deployed at specific sites to measure water flow to indicate leaks or breaks.

Associate Professor In-Young Yeo and Professor Rob Melchers, from the University of Newcastle School of Engineering, along with Ph.D. student David Bretreger, are developing and testing a new technique to add to the leak detection toolbox.

“By attaching a device called a LiDAR to a drone we can accurately see where the lower lying areas are and, where land is not covered by buildings or concrete, we can also tell how wet the ground is,” says Associate Professor In-Young.

LiDAR (Light Detection and Ranging) is a remote sensing method that uses a pulsed laser to measure ranges (variable distances) to the Earth. Differences in laser return times and wavelengths can then be used to make digital 3-D representations of the landscape and indicate the amount of water in the ground.

The University of Newcastle LiDAR soil moisture and corrosion investigation is part of a larger innovative smart water management project coordinated by NSW Smart Sensing Network and led by Sydney Water.

With a network of over 13,000 miles of water pipes, Sydney Water is undertaking a number of measures to protect its assets. Current leak detection programs have already reduced water loss by about 7.9 billion gallons per year. Understanding wet patches around pipes will assist Sydney Water to target further condition assessment and pipe failure prediction.

Brought together by the NSW Smart Sensing Network, Sydney Water, Hunter Water and seven other water utilities are collaborating with the University of Newcastle and four other universities in NSW and ACT to develop technologies to assess the condition of water supply networks.

“Our research promises to inform corrosion assessments of aging infrastructure, allowing targeting of maintenance and replacements and preventing expensive and disruptive breaks and leaks,” says Associate Professor In-Young. “We know this technique works so we are now looking to increase the accuracy of wetness detection and we’re investigating automation to enable observation of even larger areas.”

Looking to the future of this technology, In-Young sees these emerging techniques being used beyond assessing the state of water infrastructure to such applications as monitoring wetlands and managing irrigation.


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.