Combustible Gas Leak Detector Receives ATEX Compliance

Combustible Gas Leak Detector Receives ATEX Compliance

Interested in Safety?

Get Safety articles, news and videos right in your inbox! Sign up now.

Safety + Get Alerts

SENSIT Technologies, a global leader in gas detection and measurement instruments, recently announced that its HXG-2d Combustible Gas Leak Detector received ATEX compliance certification. 

ATEX approvals enable the product to be used in Europe and other countries that require ATEX certification. The SENSIT HXG-2d meets ATEX requirements when used with approved batteries.

The HXG-2d is designed to detect combustible gases. This instrument incorporates an advanced low-power semiconductor sensor to measure a wide variety of combustible gases in both the parts-per-million (ppm) and percent LEL range. The ppm readings auto-range to percent LEL when the concentration exceeds 990 ppm (2 percent LEL methane).  Optionally, all readings can be set to a resolution of 0.1 percent LEL only (ppm off).

An “on demand” back-light helps users in low-light environments. A user-activated “TICK” control assists in locating small gas leaks. Audible and visual alarms warn the operator of hazards. The alarms can be set in either the ppm or LEL modes. The default alarm is 10 percent LEL methane. The instrument is adjusted at the factory for either methane or propane as the primary gas, and is calibrated accordingly. The primary gas can be selected when ordering.

For additional information, visit SENSIT Technologies,, or call 888/473-6748 or 219/465-2700

About SENSIT Technologies
SENSIT Technologies designs, manufactures, and services a complete line of gas leak detection instruments, combustible gas indicators, and toxic gas monitors. The product line was recently expanded to include instruments that detect buried piping systems.


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.