Greyline Instruments clamp-on ultrasonic flowmeter
Greyline Instruments’ TTFM 6.1 transit-time flowmeter has powerful new digital signal processing and advanced algorithms and provides easy and accurate flow measurement of clean and relatively clean fluids, including water, oil and chemicals. The clamp-on technology does not require pipe penetration, cutting or welding. It installs in typically less than 30 minutes and a high accuracy with 25-1 turndown. It offers isolated 4-20mA output for flow rate, two relays for pulse output or alarms and a 26 million-point data logger for greater flexibility of data monitoring and control. 315-788-9500; www.greyline.com
GF Piping Systems ChlorFIT piping system
The ChlorFIT piping system from GF Piping Systems has Schedule 80 pipe and fittings that are molded from CPVC Corzan resin. The system is certified by NSF for use with hot and cold potable water, and the resin is highly resistant to heat, acids, alkalis, alcohols and many other corrosive materials. The Corzan resin has superior fire-resistant qualities, making the system ideal for applications that require ignited heat sources or are prone to fire. Available in 1/2- to 24-inch sizes with pressure ratings from 210 to 400 psi depending on pipe size, the system handles operating temperature from 32 to 200 degrees F. 800-854-4090; www.gfps.com
Mueller Water Products Jones hydrant
Jones J-4038 and J-3038 wet barrel fire hydrants from Mueller Water Products can be equipped with a Hydro-Guard pressure monitoring sensor installed in the dome top and an Echologics distribution leak detection (DX) node as the nozzle cap. The Hydro-Guard sensor monitors system pressure and can send an alert via cellular communications within minutes if a spike occurs. Data is logged for analysis and can be stored up to two years on a secure web server. The Echologics node uses acoustic sensors to find leaks on a variety of pipe materials and water distribution mains. The node is pre-assembled and consists of an acoustic sensor, analysis software, network hardware, batteries and an antenna. 800-523-8618; www.muellerwaterproducts.com
HammerHead Trenchless LT-20PRO CIPP trailer
HammerHead Trenchless’ LT-20PRO is a purpose-built trailer for CIPP applications and features a modular design with all storage, electrical power and air supply needed for a wide range of lateral lining tasks. The configuration is customizable, allowing the customer to tailor it to their specific needs and avoid duplication of existing equipment. The base model’s standard features include insulated trailer walls and ceiling, roof-mounted air conditioner, 13,000-watt generator with external slide-out, roller bed with wall mount for the wet-out table, 30-gallon wall-mounted air compressor and external and internal air connections and electrical outlets. 800-331-6653; www.hammerheadtrenchless.com
Perma-Liner Industries Vinyl Ester resin
Vinyl Ester, a high-performance epoxy vinyl ester resin from Perma-Liner Industries, provides corrosion resistance, durability and toughness for CIPP applications. It is well suited for specific applications where fluid temperature is relatively higher, and also for high-pressure and corrosive environments. The molecular architecture delivers a number of benefits, including superior mechanical properties and catalyzed pot life. 866-336-2568; www.perma-liner.com
