HammerHead Trenchless QuickLok inversion drums
HammerHead Trenchless’ QuickLok inversion drums have two drum sizes capable of holding up to 125 feet and 225 feet of 4-inch liner respectively, and a single-lever lockdown that gives a positive seal and secure latch. Other features include extra viewing ports and a detachable spindle wheel that makes it easier to navigate tight areas. Once in place, the wheel may be reattached to either side of the drum, accommodating workspace limitations or the preference of the operator. 800-331-6653; www.hammerheadtrenchless.com.
Doosan Portable Power dual flow air compressor with 210 cfm high pressure mode
Doosan Portable Power P250/HP210 Tier 4 Final portable air compressor delivers the pressure and flow typically supplied by two units in a single air compressor. The new model replaces the P250/HP185 and delivers 250 cfm of air at 100 psi in low-pressure mode and 210 cfm of air at 150 psi in high-pressure mode. It offers eight hours at 100 percent load on low-pressure and nine hours at 100 percent load on high-pressure mode. It has a 34.5-gallon fuel tank, and cold starts in temperatures as low as negative 10 degrees F. To simplify maintenance, it has convenient curbside discharge valves and cooler clean-out ports. All filters are readily accessible and clearly marked, and diagnostic connections are easier to reach. 800-633-5206; www.doosanportablepower.com.
REHAU MUNICIPEX municipal water and wastewater line
REHAU is offering two additional crosslinked polyethylene PEXa pipes in its municipal piping program. In addition to MUNICIPEX water service line, the expanded product range now includes MUNICIPEX pre-insulated for cold-weather applications and MUNICIPEX force main for wastewater applications. Specifically for water distribution in colder climates, the pre-insulated pipe provides an extra level of protection from freezing, particularly useful when laying pipe below the frost line is not possible. A MUNICIPEX carrier pipe is surrounded by a solid layer of CFC-free polyurethane foam insulation and a corrugated LDPE outer casing that provides superior durability. MUNICIPEX force main is used in publicly owned treatment works systems for conveying wastewater under pressure from the discharge side of a pump or pneumatic ejector to a discharge point. The pipe is color coded with a green coating that helps installers easily identify wastewater applications. 703-777-5255; www.na.rehau.com.
Aries Industries Wolverine 2.0 cutting system
The Wolverine 2.0 cutting system from Aries Industries is able to operate in pipes from 6 to 18 inches. The self-propelled, electric system features advanced ergonomic fingertip control, and the ability to cut through materials with maximum speed and precision. Its linearly adjustable speed and axis movement offer maneuverability, coupled with a compact profile and all-wheel drive to navigate tough terrain. The 500-foot cable reduces truck setup time, and the electric two-speed milling motor is field repairable and rebuildable. The system has multiple wheel configurations to adapt to pipe conditions. 800-234-7205; www.ariesindustries.com.
Jetstream of Houston Jetstream TwinForce dual pump system
Jetstream of Houston’s Jetstream TwinForce dual pump 650 hp waterblast system featuresg a John Deere Tier 4 engine and is designed for high-flow applications including industrial cleaning, surface preparation and hydro-demolition. It functions as a large-capacity 650 hp unit or as two 325 hp independently run units. The TwinForce unit is built around the UNx fluid end waterblast system so operating pressures from 8,000 to 40,000 psi can be changed in minutes. 800-231-8192; www.waterblast.com.
