Endress+Hauser announces its April 2013 schedule of instrumentation training courses. Classes typically are a combination of classroom and hands-on training on either the Endress+Hauser Process Training Unit (PTU), a full-scale, working process skid with online instrumentation and controls, or live instruments in training stands, both designed to simulate operating conditions. 

The following courses are included in the April training: 

Flow School – Introductory

Monday, April 8 – Wednesday, April 10 in Memphis, Tenn. 

The F-101 introductory course on flow measurement will provide maintenance and engineering personnel with a basic understanding of numerous flow technologies, plus in-depth training on magnetic and Coriolis flowmeters that apply to virtually any manufacturer’s equipment. 

The 16-hour course covers:

• DP transmitters/primary DP devices
• Vortex shedding flowmeters
• Electromagnetic flowmeters
• Coriolis flowmeters
• Ultrasonic flowmeters
• Thermal dispersion flowmeters
• Volumetric vs. mass flow
• Field tooling 

Flow School – Advanced

Wednesday, April 10 – Friday, April 12 in Memphis, Tenn., and Tuesday, April 30 – Thursday, May 2 in Matthews, N.C. 

The F-102 advanced course on flow measurement is designed for students who have successfully completed the basic Flow School Course. The class will start by providing instrument techs and engineers with a brief section on the basic understanding of numerous flow technologies. Following this introduction, it proceeds with in-depth training on vortex shedding, electromagnetic, ultrasonic, and Coriolis flowmeters, plus density and viscosity measurements. 

The 16-hour course covers:

• Coriolis flowmeters
• Ultrasonic flowmeters
• Electromagnetic flowmeters
• Density and viscosity measurements
• Vortex shedding flowmeters
• Endress+Hauser FieldCare

Time of Flight (ToF) School

Wednesday, April 10 in Greenwood, Ind. 

The L-102 time of flight (ToF) course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters that apply to virtually any manufacturer’s equipment. 

The 16-hour course covers:

• Radar transmitters
• Envelope curve evaluation
• Guided radar transmitters
• Ultrasonic transmitters
• ToF tooling
• ToF applications 

Flow School Coriolis

Wednesday, April 10 ­– Friday, April 12 in Memphis, Tenn., and Tuesday, April 30 – Thursday, May 23 in Matthews, N.C. 

The F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer’s equipment. It also provides in-depth training on density and concentration measurements. The course (8 hours) will start by providing maintenance and engineering personnel with a basic understanding of the Coriolis principle. Following this introduction, it proceeds with in-depth training on density and concentration measurements. 

The course covers: 

• Flow overview
• Field tooling
• Coriolis basics
• Applications
• Entrained air
• Density measurements
• Zero points 

Pressure & Temperature School

Thursday, April 11 in Greenwood, Ind., and Tuesday, April 23 – Wednesday, April 24 in Matthews, N.C. 

The P-101 Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies that apply to virtually any manufacturer’s equipment, as well as the skills needed to set up and maintain such equipment. 

The course covers:

• Pressure transmitters
• Differential pressure transmitters - flow
• Differential pressure transmitters - level
• Diaphragm seals
• Temperature transmitters
• RTD/thermocouple sensors
• Displays & relays
• Communication tools & methods 

Open Space & Guided Wave Radar Level School

Wednesday, April 17 in Mobile, Ala., and Wednesday, April 24 in Gonzales, La. 

The L-104 Radar Level School is an introductory course (8 hours) on Open Space and Guided Wave Radar Level for maintenance and engineering personnel. The course dedicates a half-day to each technology to give a basic understanding of these level technologies. 

The course covers:

• Guided Radar
• High & Low Frequency Radar
• E+H FieldCare Software Tooling 

8 PDH (Professional Development Hours) available upon completion of the entire course.

Click here to register for any of the courses offered. 

About Endress+Hauser
Endress+Hauser is a supplier of measuring devices, services and solutions for industrial process engineering. The company supplies sensors, devices, systems and services for level, flow, pressure and temperature measure­ment as well as liquid analysis and measured value recording. The company supports its customers with automa­tion, logistical and IT services and solutions.