AERZEN Delta Hybrid Direct Drive Screw Blower
The AERZEN Delta Hybrid Direct Drive Screw Blower offers an efficient newly designed stage with a 3+4 rotors profile, extended turndown ratio of up to 1:5, and a new drive concept for low-pressure applications. A reduced footprint accommodates side-by-side installation. See how easy it is to generate low-pressure compressed air with substantial cost savings. It offers up to 37% higher energy efficiency compared to previous blowers, along with maximum noise reduction with customized silencer technologies. 610-380-0244; www.aerzen.com; Booth 6447
Aqua-Aerobic Systems AquaPRS PFAS Removal System
The AquaPRS PFAS Removal System from Aqua-Aerobic Systems utilizes sorbent suspension to adsorb PFAS and a separator to extract clean water from the suspension. The turbulent adsorbent slurry prevents biofouling and controls solids and mineral buildup. Additionally, the adsorbent material is specially engineered to adsorb much more PFAS than can be adsorbed by the same amount of other adsorbents or ion-exchange resins, resulting in significantly fewer life cycle costs. The process is completely automated, including replacement of the adsorbent, and allows parameter adjustments in response to varying influent concentrations of PFAS. 815-654-2501; www.aqua-aerobic.com; Booth 2641
Aries Voyager HD Mainline Inspection System
The Voyager HD Mainline Inspection System from Aries is a high definition video system for inspecting relined mainlines relined 6 to 48 inches. It includes a powerful transporter, a full HD 1080p WiperCam camera, and 1,200-foot cable reel — controlled by CANbus technology for instant crawler and camera response. Components are operated by an ergonomically advanced dual joystick controller and reel-mounted pendant. The tractor is equipped with a rear-viewing HD camera and an integral motorized lift to center the camera in a range of pipe sizes. The pan-and-tilt video camera with 120x zoom captures every pipe detail. Built-in lens wiper technology maximizes time in the pipe. 800-234-7205; www.ariesindustries.com; Booth 641
Asahi/America Series 19 S400
Asahi/America has expanded its Series 19 electric actuation line to include a larger-sized actuator, the S400, capable of operating on the company’s family of 8- and 10-inch Type-57 butterfly valves. It is part of the SAV Smart Pack electric actuator product line and is available as an on/off, failsafe, modulating, or modulating failsafe unit. The actuators have an output torque range up to 3,540 inch-pounds. Standard features include a heater, one set of dry contacts for PLC confirmation and one for alarm reporting, an OLED screen with push-buttons and local controls. 800-343-3618; www.asahi-america.com; Booth 2653
AWWA Operations/Administrative Membership
AWWA’s Operations/Administrative Membership is for operations and administrative staff below the supervisory level at utilities with more than 1,000 service connections or any staff of a utility with less than 1,000 service connections. Members receive access to a range of benefits, including membership in their local section, a print subscription to Opflow — the water community’s primary network for operator-level workers, member-exclusive pricing on trainings and publications to help earn and maintain an operator license, additional member discounts on all other AWWA offerings and a professional network. 800-926-7337; www.awwa.org; Booth 1045
BDP Industries DSP Screw Press
The DSP Screw Press from BDP Industries is a heavy-duty option for those looking for dewatering performance in a completely enclosed unit with low energy and water consumption, along with reduced operation and maintenance costs. The pivoting basket design allows for increased access for maintenance. Other improvements include the vertical thickener for prethickening, processing flow rates of up to 150 gpm, as well as the ability for a small-scale package system capable of 5 to 10 gpm. 518-695-6851; www.bdpindustries.com; Booth 1743
Blue-White Industries FLEXFLO M4
The low-shearing pumping action of the FLEXFLO M4 peristaltic metering pump from Blue-White Industries allows it to dose long-chain polymers gently and precisely without damage to the chemical. It will also meter off-gassing chemicals such as peracetic acid and sodium hypochlorite without experiencing vapor lock or loss of prime. Advanced features include a responsive 5-inch LCD with clearly recognizable icons that will respond even when the operator is wearing work gloves. Legacy communications include 4-20mA, and advanced communication protocols include Profibus, Modbus TCP and Ethernet IP. M4 firmware is field-upgradeable. 714-893-8529; www.blue-white.com; Booth 3753
Crane Pumps and Systems Barnes Chopper Pumps
Barnes Chopper Pumps from Crane Pumps and Systems are designed to meet the rigorous demands of wastewater applications, catering specifically to collection systems, raw sewage and other scenarios with substantial solid content. These pumps excel in solid size reduction, offering heightened reliability, ease of servicing, and overall low life cycle costs. The versatility of choosing between an oil-filled or air-filled motor enhances their adaptability, allowing users to tailor the pump to the requirements of their application. The chopping technology and hydraulic performance in both motor options slice through even the most challenging solids in the waste stream. 937-773-2442; www.cranepumps.com; Booth 3645
CUES OZ4-HD
The CUES OZ4-HD is a 1080p high-definition pan-and-tilt mainline camera for sanitary and storm sewer inspections. Designed to meet the highest industry standards, it offers video with a level of detail that can detect and address potential pipeline issues with superior accuracy. Additionally, it is designed specifically to be backward compatible, meaning customers currently running CUES equipment are now able to upgrade to HD for a minimal investment. GraniteNet Software offers robust support for HD video, ensuring seamless integration and optimal performance when using the camera. 800-327-7791; www.cuesinc.com; Booth 519
De Nora SORB Contaminant Removal Systems
Using more than three decades of experience in adsorptive technologies, De Nora has taken the lessons learned from treating arsenic and other organic contaminants and applied that expertise for the removal of PFAS. Ensuring compliance, SORB Contaminant Removal Systems are predesigned and preconfigured to make application design simple, while maximizing uptime, cost efficiency and ease of operation. Systems are optimized for treating PFAS, whether using ion exchange, GAC or both, and have piloting capabilities to help determine the optimal technology based on the specific water quality matrix. 215-997-4000; www.denora.com; Booth 2616
DeZURIK APCO SmartCHECK
APCO SmartCHECK pump control valves from DeZURIK are for raw sewage, wastewater, raw water, clean water or any fluid pumped through a pipeline. It is a single valve that combines the functionality of a full-featured electric motor-operated pump control valve with the best features of APCO’s premium CVS-6000 swing check valve. It has been engineered to control pressure surges during normal pump startups and shutdowns, and to close positively upon power failure, without the need for hydraulic power units, accumulators and maintenance-intensive hydraulic controls. The torque unit allows normal function, but will automatically close upon power failure, preventing backflow. 320-259-2000; www.dezurik.com; Booth 917
Emerald Coast WAVE Vacuum Sampler
The WAVE Vacuum Sampler from Emerald Coast represents a significant leap forward in wastewater sampling technology. Its sampling chamber delivers a high rate of accuracy. Achieving ±3% accuracy on the first draw and less than 1% repeatability thereafter, it ensures consistent and reliable sampling results. This high level of precision eliminates the need for constant calibration, saving time and reducing operational costs. 850-469-1142; www.emeraldcoastmfg.com; Booth 2061
Fournier Rotary Press
Experience seamless, fully automated dewatering operations with minimal operator involvement. The Fournier Rotary Press optimizes polymer usage through an external mixing process, allowing operators to easily verify floc quality. With extremely low power and washwater usage, it ensures both efficiency and cost-effectiveness. The design features robust construction, few mechanical parts and slow rotation speed, resulting in the lowest maintenance cost. An automated 5-minute daily self-cleaning cycle further enhances reliability, making it a sustainable choice for wastewater management. 800-463-6328; www.fournierindustries.com; Booth 1219
Halliday Products Series F Flushmount Floodtight Covers
Series F Flushmount Floodtight Covers from Halliday Products are made from highly durable aluminum and stainless steel, featuring EDPM compression gaskets, spring assists and stainless steel camlocks. They are structurally designed to support a 25-foot column of water. 800-298-1027; www.hallidayproducts.com; Booth 7329
Inovair Blowers
Highly efficient and durable geared centrifugal blowers from Inovair deliver a low total ownership cost. Thanks to industry-standard components, their proven design offers simplicity and 99.6% uptime. They offer energy savings as high as 45% relative to alternative options, without electrical complexity and durability issues. Designed to be compact and for outdoor installation, implementing the blowers avoids expensive construction costs. 913-469-7244; www.inovair.com; Booth 4075
JDV Equipment Nozzle Mix System
The dual-zone Nozzle Mix System from JDV Equipment provides uniform mixing patterns that produce even distribution and a stable environment. It optimizes solids suspension and contact to promote efficiency in a wide range of applications. The system is designed with pumps installed outside the tanks and are typically chopper pumps or pumps incorporating in-line grinders. The high-velocity nozzles mounted inside the tank completely mix the tank contents. Applications include anaerobic digestion, biosolids storage, blending tanks, excess flow tanks, septage or leachate, anoxic zones, CSO handling, aerobic digestion, secondary treatment and biosolids holding ponds. 973-366-6556; www.jdvequipment.com; Booth 2201
Keller America LevelRat
The LevelRat nonfouling level transmitter from Keller America is built to provide reliable, low-maintenance service in wastewater level measurement applications. It offers 0.5% FS TEB accuracy, multiple output signal options (analog and digital), and models equipped with a 4-20 mA analog output include UL/cUL approvals for use in hazardous locations as well as lightning protection at no additional cost. 877-253-5537; www.kelleramerica.com; Booth 935
KROHNE OPTWAVE 1500 Series
The OPTWAVE 1500 Series from KROHNE is the latest member of the OPTWAVE 80 GHz radar product family. The affordable, yet high-performance product is suitable for level or open channel flow applications throughout water and wastewater processing facilities. 800-356-9464; www.us.krohne.com; Booth 6323
Lakeside Equipment Screw Pumps
Lakeside Equipment Screw Pumps efficiently lift large amounts of water at a low static head. Variable pumping capacity automatically adjusts the rate and power, eliminating the need for costly electrical controls. The reliable screw pumps (open and closed) fit a variety of applications including raw and industrial wastewater, as well as stormwater pumping, capable of draining waterlogged land by moving large quantities of water from lower to higher areas. And since they require little attention, they are suitable for remote plants. They are BABA-compliant and make ideal drop-in replacements for less reliable designs. 630-837-5640; www.lakeside-equipment.com; Booth 1829
OZ Lifting Products Davit Cranes
Streamline water treatment operation with OZ Lifting Products’ versatile davit cranes featuring steel, aluminum, and composite materials. Options include the Alumi-Lite, CompOZite and CompOZite Elite with features like aerospace-grade aluminum and carbon fiber, boasting high strength-to-weight ratios. The Tele-Pro’s telescopic boom and XR Series cranes offer exceptional reach and maneuverability. Plus, save money with its multibase system. Buy one crane and use it with multiple strategically placed bases around a facility, reducing overall equipment costs. 800-749-1064; www.ozliftingproducts.com; Booth 8229
Parkson Granite AGS
Parkson’s Granite AGS process is designed to improve the performance of activated sludge systems. It has the ability to form granular sludge rather than typical floc-forming sludge. The advantages of aerobic granular sludge are excellent settleability and robustness of the biological colony. The granules settleability is more than 5X faster than a conventional activated sludge floc from the dense nature of the colony. Denser, better-settling sludge allows plants to be designed with smaller treatment basins, reducing capital costs, and providing greater sustainability given more efficient operation. 888-727-5766; www.parkson.com; Booth 4001
Polydyne polymers
Polydyne offers a line of water-soluble polymers for municipal water and wastewater treatment applications. The CLARIFLOC line provides high-quality flocculant and coagulant polymers, essential for improving water clarity and treatment efficiency. FLOSPERSE products are designed for effective scale prevention and treatment, ensuring smooth operation and reduced maintenance costs. The FLOSURGE line of drag-reduction polymers enhances flow across various applications, including cake solids hauling, pumping, municipal irrigation, and stormwater management. The solutions are tailored to meet the evolving needs of municipalities, optimizing performance and sustainability in water treatment processes. 800-848-7659; www.polydyneinc.com; Booth 4028
Saf-T-Flo Chemical Injection Saf-T-Seal
The Saf-T-Seal elastomeric duckbill tip from Saf-T-Flo Chemical Injection can be a timesaver when added to injection quills dosing sodium hypochlorite or ammonia. These chemicals are prone to forming deposits, which eventually lead to a clogged injection quill. The tip can be added to any 3/8- or 1/2-inch injection quill to help reduce tip clogging, extending maintenance intervals. 800-957-2383; www.saftflo.com; Booth 3761
SAVECO North America BEAST
Designed specifically for septage receiving and other high-solids applications, the BEAST from SAVECO North America incorporates a dual-drive screening system that allows the drum speed and auger speed to be controlled independently, allowing for shorter unload times, and higher capture efficiency. A sloped inlet along with a U-shaped flushing header keeps the screen inlet area free of debris buildup. The drum is supported from the top with an oversized slewing ring bearing, featuring a new auto-lube system, decreasing maintenance requirements and downtime. Additionally, it operates without rock traps or grinders, providing high performance and low life cycle costs. 815-636-8306; www.savecowaterna.com; Booth 2217
SEEPEX Smart Air Injection
Smart Air Injection is a SEEPEX customized system solution for pumping over long distances. The system uses compressed air and polymer injections to convey sewage sludge, or other media with a dry matter content of 20% to 40%, over distances of up to 1,000 meters. This combination ensures a low pressure level in the delivery line, as well as low friction, which translates into a long life cycle and low operating costs. The system is easy to integrate into existing automation and control systems; reduces the pressure rating of the pipework and valves; and is an enclosed pipework system, eliminating unpleasant odors or rainfall dilution. Open-hopper SAI systems with Smart Conveying Technology reduce maintenance time by up to 85% with the maintain-in-place design, requiring no disassembly of discharge pipework. 937-864-7150; www.seepex.com; Booth 3929
Smith & Loveless PISTA INVORSOR
Designed to set new standards in grit removal efficiency, the PISTA INVORSOR from Smith & Loveless captures ultra-fine grit particles down to 75 microns, offering 95% removal efficiency performance across all flow conditions. Model capacities range from 0.5 to 50 mgd, including the largest 75-micron unit capacities. It combines proven particle fine-capture methods: enhanced settling by inclined plates meeting a defined surface overflow rate with hydraulic forced vortex technology. Performance is never derated for wet weather events, which can carry 40 times the normal grit load. Variable inlet-outlet design capability for channel layouts yields significant design flexibility. 800-898-9122; www.smithandloveless.com; Booth 4029
Sulzer Pumps Solutions HST 10
The HST 10 turbocompressor from Sulzer Pumps Solutions cuts costs and boosts reliability for smaller treatment plants processing up to 3 mgd. Ideal for municipal and industrial wastewater treatment, it offers best-in-class energy efficiency through cutting-edge turbo technology and a permanent magnet motor. With no gears or mechanical bearings, it ensures minimal maintenance costs and high reliability. Compact and vibration-free, it reduces operational expenditure and has a significant positive impact on sustainability, making it a top choice for efficient and eco-friendly wastewater treatment. 203-238-2700; www.sulzer.com; Booth 6139
Vac-Con Non-CDL Titan
The 3-yard version of the Titan line of trucks provides the performance you’d expect from a Vac-Con machine with minimal footprint. This is a suitable option for smaller organizations and those who need to have anyone on the team jump in the truck and go, as no CDL is required. The Non-CDL Titan weighs under 26,000 GVWR with full freshwater capacity. It features 3 yards of usable capacity in the debris tank and a simple operating system designed for all skill levels. 888-920-2945; www.vac-con.com; Booth 3009
Vactor 2100i
The 2100i from Vactor provides the cleaning power needed to handle the toughest sewer challenges. This system employs advanced technology that not only enhances the performance of the equipment but the individuals who operate it — meaning less fatigue, more comfort, push-button operation, greater precision and superior power and performance. An international dealer network maintains a vast inventory of spare parts and offers fast shipment to any region of the world. Altogether, the rugged, reliable unit is easy to operate and maintain, and is an easy choice when you are looking for quality equipment that is built to last. 815-672-3171; www.vactor.com; Booth 2757
Vaughan Conditioning Pump
The Vaughan Conditioning Pump returns to the 2024 Vaughan Maintenance Event during the Operations Challenge. As a proud, returning sponsor, they invite attendees to support the over 50 teams from around the globe working on specific scenarios that include the popular pump. Then visit to discuss how it is designed to be used in different applications, saving teams from costly clean-out cycles and maintenance. 888-249-2467; www.chopperpumps.com; Booth 3717
VEGA Americas VEGAPLUS
The VEGAPLUS line of 80 GHz radar sensors from VEGA Americas uses precision focusing to deliver reliable measurements regardless of internal obstructions, changing temperatures, condensation or dust. The series is a standalone loop-powered sensor available as either a compact version with cable connection housing or with an IP68 housing and fixed cable connection. These sensors are easily adjusted via Bluetooth with a smartphone or tablet, making setup and diagnostics significantly easier. 800-367-5383; www.vega.com; Booth 3561
Veolia Water Technologies ZeeLung and zeeDENSE
Upgrading wastewater treatment plants for capacity expansion or nutrient removal can be complex and expensive. The ZeeLung Membrane-Aerated Biofilm Reactor from Veolia Water Technologies is used to intensify the conventional activated sludge process without having to construct new bioreactor tanks. It expands biological capacity and improves nutrient removal in a simple, fast and modular way, while also reducing energy and mitigating GHG emissions. The zeeDENSE MABR combines the ZeeLung MABR and densification to increase biological and hydraulic capacity, resulting in super-intensification of activated sludge. 866-439-2837; www.watertechnologies.com; Booth 2229
Xylem Flygt Concertor
Xylem’s Flygt Concertor offers wastewater pumping with reliability and efficiency. Its Adaptive N impeller ensures clog-free performance, handling large solids effortlessly. Specialized software adjusts speed and can reverse to clear blockages, minimizing downtime. Integrated monitoring and control adapt in real time, providing crucial operational feedback. With IE4-equivalent motor efficiency and compact design, it optimizes setup and operation, reducing life cycle costs. It’s the ideal choice for maximizing performance and minimizing disruptions in wastewater management. 704-409-9700; www.xylem.com; Booth 4429
